New Products

Pololu item #: 2873
Brand: Pololu
Status: Active and Preferred 
Free add-on shipping in USA 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

The S9V11F3S5C3 switching step-up/step-down regulator efficiently produces a fixed 3.3 V (default) or 5 V (selectable) output whether it is higher or lower than the input voltage, which can range from 3 V to 16 V. The regulator also has fixed 3.3 V low-voltage cutoff with hysteresis that can be used to prevent battery over-discharge. The compact (0.5″ × 0.6″) module can supply a typical output current of up to 1.5 A when the input voltage is close to the output voltage.

Pololu item #: 2872
Brand: Pololu
Status: Active and Preferred 
Free add-on shipping in USA 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

The S9V11F3S5 switching step-up/step-down regulator efficiently produces a fixed 3.3 V (default) or 5 V (selectable) output whether it is higher or lower than the input voltage, which can range from 2 V to 16 V. (Note: minimum start-up voltage is 3 V, but it operates to 2 V after that.) The compact (0.5″ × 0.6″) module can supply a typical output current of up to 1.5 A when the input voltage is close to the output voltage.

Pololu item #: 2871
Brand: Pololu
Status: Active and Preferred 
Free add-on shipping in USA 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

The S9V11F3S5CMA switching step-up/step-down regulator efficiently produces a fixed 3.3 V (default) or 5 V (selectable) output whether it is higher or lower than the input voltage, which can range from 2 V to 16 V. (Note: minimum start-up voltage is 3 V, but it operates to 2 V after that.) The regulator also has a precision-adjustable low-voltage cutoff with hysteresis that can be used to prevent battery over-discharge. The compact (0.5″ × 0.6″) module can supply a typical output current of up to 1.5 A when the input voltage is close to the output voltage.

Pololu item #: 2870
Brand: Pololu
Status: Active and Preferred 
Free add-on shipping in USA 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

The S9V11F5S6CMA switching step-up/step-down regulator efficiently produces a fixed 5 V (default) or 6 V (selectable) output whether it is higher or lower than the input voltage, which can range from 2 V to 16 V. (Note: minimum start-up voltage is 3 V, but it operates to 2 V after that.) The regulator also has a precision-adjustable low-voltage cutoff with hysteresis that can be used to prevent battery over-discharge. The compact (0.5″ × 0.6″) module can supply a typical output current of up to 1.5 A when the input voltage is close to the output voltage.

Pololu item #: 2869
Brand: Pololu
Status: Active and Preferred 
Free add-on shipping in USA 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

The S9V11MA switching step-up/step-down regulator efficiently produces a finely adjustable output between 2.5 V and 9 V whether it is higher or lower than the input voltage, which can range from 2 V to 16 V. (Note: minimum start-up voltage is 3 V, but it operates to 2 V after that.) The compact (0.5″ × 0.6″) module can supply a typical output current of up to 1.5 A when the input voltage is close to the output voltage.

Pololu item #: 2868
Brand: Pololu
Status: Active and Preferred 
Free add-on shipping in USA 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

The S9V11MACMA switching step-up/step-down regulator efficiently produces a finely adjustable output between 2.5 V and 9 V whether it is higher or lower than the input voltage, which can range from 3 V to 16 V. The regulator also has a precision-adjustable low-voltage cutoff with hysteresis that can be used to prevent battery over-discharge. The compact (0.5″ × 0.6″) module can supply a typical output current of up to 1.5 A when the input voltage is close to the output voltage.

Pololu item #: 2965
Brand: Unspecified
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

Get a FREE copy of Circuit Cellar magazine’s December issue with your order while supplies last. To get your free issue, enter the coupon code CIRCUIT1217 into your shopping cart. The magazine will add 6 ounces to the package weight when calculating your shipping options.

Pololu item #: 3425
Brand: FEETECH
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

The FS5106B is a general-purpose, low-cost standard analog servo from FEETECH. Two ball bearings help reduce friction and improve performance. Servo horns and associated hardware are included.

Key specs at 6 V: 0.16 sec/60°, 80 oz-in (6 kg-cm), 41 g.

Pololu item #: 3424
Brand: FEETECH
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

The FS5103B is a general-purpose, low-cost standard analog servo from FEETECH. Two ball bearings help reduce friction and improve performance. Servo horns and associated hardware are included.

Key specs at 6 V: 0.16 sec/60°, 53 oz-in (3.8 kg-cm), 40 g.

Pololu item #: 3432
Brand: Parallax
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

The Parallax Feedback 360° provides the functionality of a light-duty standard servo, a continuous rotation servo, a high-speed servo, and encoder feedback in one convenient package. Its speed is controlled with standard RC servo pulses, just like a typical continuous rotation servo, and it provides a return signal line from an internal Hall effect sensor that provides digital angular position feedback. An external microcontroller can use this signal to make the servo hold any angle, much like a standard servo except without any limits on the range of motion, or it can use it for closed-loop speed control. Recommended operating voltage range is 5.8 V to 8.4 V

Key specs at 6 V: 140 RPM (no-load), 35 oz-in (2.5 kg-cm), 41 g

Pololu item #: 3430
Brand: FEETECH
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

The FS5106R is a standard-sized servo that has been built by FEETECH specifically for continuous rotation, making it an easy way to get your robot moving. It features two ball bearings on the output shaft for reduced friction, and it offers easy access to the rest-point adjustment potentiometer.

Key specs at 6 V: 95 RPM (no-load), 83 oz-in (6 kg-cm), 40 g

Pololu item #: 2964
Brand: Unspecified
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

Get a FREE copy of Circuit Cellar magazine’s November issue with your order while supplies last. To get your free issue, enter the coupon code CIRCUIT1117 into your shopping cart. The magazine will add 6 ounces to the package weight when calculating your shipping options.

Pololu item #: 3721
Brand: Pololu
Status: Active and Preferred 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 6V brushed DC motor with long-life carbon brushes combined with a 312.5:1 metal spur gearbox. The gearmotor is cylindrical with a diameter of 20 mm, and the D-shaped output shaft is 4 mm in diameter and extends 18 mm from the face plate of the gearbox. This version also has a 6 × 2 mm extended motor shaft.

Key specs at 6 V: 46 RPM and 170 mA with no load, 220 oz-in (16 kg-cm) and 2.9 A at stall. Note: the gearbox torque limit is 70 oz-in (5 kg-cm); see detailed description for important product limitations.

Pololu item #: 3718
Brand: Pololu
Status: Active and Preferred 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 6V brushed DC motor with long-life carbon brushes combined with a 156.3:1 metal spur gearbox. The gearmotor is cylindrical with a diameter of 20 mm, and the D-shaped output shaft is 4 mm in diameter and extends 18 mm from the face plate of the gearbox. This version also has a 6 × 2 mm extended motor shaft.

Key specs at 6 V: 93 RPM and 170 mA with no load, 110 oz-in (7.9 kg-cm) and 2.9 A at stall. Note: the gearbox torque limit is 70 oz-in (5 kg-cm); see detailed description for important product limitations.

Pololu item #: 3714
Brand: Pololu
Status: Active and Preferred 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 6V brushed DC motor with long-life carbon brushes combined with a 62.5:1 metal spur gearbox. The gearmotor is cylindrical with a diameter of 20 mm, and the D-shaped output shaft is 4 mm in diameter and extends 18 mm from the face plate of the gearbox. This version also has a 6 × 2 mm extended motor shaft.

Key specs at 6 V: 230 RPM and 170 mA at no load, 54 oz-in (3.9 kg-cm) and 2.9 A at stall.

Pololu item #: 3497
Brand: Pololu
Status: Active and Preferred 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 12V brushed DC motor with long-life carbon brushes combined with a 488.3:1 metal spur gearbox. The gearmotor is cylindrical with a diameter of 20 mm, and the D-shaped output shaft is 4 mm in diameter and extends 18 mm from the face plate of the gearbox. This version also has a 6 × 2 mm extended motor shaft.

Key specs at 12 V: 29 RPM and 90 mA with no-load, 350 oz-in (25 kg-cm) and 1.6 A at stall. Note: the gearbox torque limit is 70 oz-in (5 kg-cm); see detailed description for important product limitations.

Pololu item #: 3494
Brand: Pololu
Status: Active and Preferred 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 12V brushed DC motor with long-life carbon brushes combined with a 250:1 metal spur gearbox. The gearmotor is cylindrical with a diameter of 20 mm, and the D-shaped output shaft is 4 mm in diameter and extends 18 mm from the face plate of the gearbox. This version also has a 6 × 2 mm extended motor shaft.

Key specs at 12 V: 57 RPM and 90 mA with no-load, 200 oz-in (14.5 kg-cm) and 1.6 A at stall. Note: the gearbox torque limit is 70 oz-in (5 kg-cm); see detailed description for important product limitations.

Pololu item #: 3490
Brand: Pololu
Status: Active and Preferred 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 12V brushed DC motor with long-life carbon brushes combined with a 100:1 metal spur gearbox. The gearmotor is cylindrical with a diameter of 20 mm, and the D-shaped output shaft is 4 mm in diameter and extends 18 mm from the face plate of the gearbox. This version also has a 6 × 2 mm extended motor shaft.

Key specs at 12 V: 140 RPM and 90 mA with no-load, 85 oz-in (6.1 kg-cm) and 1.6 A at stall. Note: the gearbox torque limit is 70 oz-in (5 kg-cm); see detailed description for important product limitations.

Pololu item #: 3486
Brand: Pololu
Status: Active and Preferred 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 12V brushed DC motor with long-life carbon brushes combined with a 25:1 metal spur gearbox. The gearmotor is cylindrical with a diameter of 20 mm, and the D-shaped output shaft is 4 mm in diameter and extends 18 mm from the face plate of the gearbox. This version also has a 6 × 2 mm extended motor shaft.

Key specs at 12 V: 570 RPM and 90 mA with no-load, 26 oz-in (1.9 kg-cm) and 1.6 A at stall.

Pololu item #: 3756
Brand: Pololu
Status: Active and Preferred 
Free shipping in USA 
Free add-on shipping in USA 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

This add-on board makes it easy to control two high-power DC motors with a Raspberry Pi. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 36 V operating range and are efficient enough to deliver a continuous 18 A without a heat sink. The drivers offer basic current limiting functionality, and they accept ultrasonic PWM frequencies for quieter operation. The default pin mappings make it easy to get started, but they can be customized for more specialized applications. This version ships as a partial kit; all surface-mount components are installed, but the included through-hole connectors are not soldered in.

Pololu item #: 3754
Brand: Pololu
Status: Active and Preferred 
Free shipping in USA 
Free add-on shipping in USA 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

This add-on board makes it easy to control two high-power DC motors with a Raspberry Pi. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 30 V operating range and are efficient enough to deliver a continuous 22 A without a heat sink. The drivers offer basic current limiting functionality, and they accept ultrasonic PWM frequencies for quieter operation. The default pin mappings make it easy to get started, but they can be customized for more specialized applications. This version ships as a partial kit; all surface-mount components are installed, but the included through-hole connectors are not soldered in.

Pololu item #: 3753
Brand: Pololu
Status: Active and Preferred 
Free shipping in USA 
Free add-on shipping in USA 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

This add-on board makes it easy to control two high-power DC motors with a Raspberry Pi. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 36 V operating range and are efficient enough to deliver a continuous 14 A without a heat sink. The drivers offer basic current limiting functionality, and they accept ultrasonic PWM frequencies for quieter operation. The default pin mappings make it easy to get started, but they can be customized for more specialized applications. This version ships fully assembled with connectors soldered in.

Pololu item #: 3752
Brand: Pololu
Status: Active and Preferred 
Free shipping in USA 
Free add-on shipping in USA 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

This add-on board makes it easy to control two high-power DC motors with a Raspberry Pi. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 36 V operating range and are efficient enough to deliver a continuous 14 A without a heat sink. The drivers offer basic current limiting functionality, and they accept ultrasonic PWM frequencies for quieter operation. The default pin mappings make it easy to get started, but they can be customized for more specialized applications. This version ships as a partial kit; all surface-mount components are installed, but the included through-hole connectors are not soldered in.

Pololu item #: 3751
Brand: Pololu
Status: Active and Preferred 
Free shipping in USA 
Free add-on shipping in USA 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

This add-on board makes it easy to control two high-power DC motors with a Raspberry Pi. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 30 V operating range and are efficient enough to deliver a continuous 18 A without a heat sink. The drivers offer basic current limiting functionality, and they accept ultrasonic PWM frequencies for quieter operation. The default pin mappings make it easy to get started, but they can be customized for more specialized applications. This version ships fully assembled with connectors soldered in.

Pololu item #: 3750
Brand: Pololu
Status: Active and Preferred 
Free shipping in USA 
Free add-on shipping in USA 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

This add-on board makes it easy to control two high-power DC motors with a Raspberry Pi. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 30 V operating range and are efficient enough to deliver a continuous 18 A without a heat sink. The drivers offer basic current limiting functionality, and they accept ultrasonic PWM frequencies for quieter operation. The default pin mappings make it easy to get started, but they can be customized for more specialized applications. This version ships as a partial kit; all surface-mount components are installed, but the included through-hole connectors are not soldered in.

Pololu item #: 2518
Brand: Pololu
Status: Active and Preferred 
Free shipping in USA 
Free add-on shipping in USA 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 40 V operating range and are efficient enough to deliver a continuous 18 A without a heat sink. The drivers offer basic current sensing and current limiting functionality, and they accept ultrasonic PWM frequencies for quieter operation. The Arduino pin mappings can all be customized if the defaults are not convenient, and the motor driver control lines are broken out along the left side of the shield for general-purpose use without an Arduino.

Pololu item #: 2517
Brand: Pololu
Status: Active and Preferred 
Free shipping in USA 
Free add-on shipping in USA 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 30 V operating range and are efficient enough to deliver a continuous 22 A without a heat sink. The drivers offer basic current sensing and current limiting functionality, and they accept ultrasonic PWM frequencies for quieter operation. The Arduino pin mappings can all be customized if the defaults are not convenient, and the motor driver control lines are broken out along the left side of the shield for general-purpose use without an Arduino.

Pololu item #: 2516
Brand: Pololu
Status: Active and Preferred 
Free shipping in USA 
Free add-on shipping in USA 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 40 V operating range and are efficient enough to deliver a continuous 14 A without a heat sink. The drivers offer basic current sensing and current limiting functionality, and they accept ultrasonic PWM frequencies for quieter operation. The Arduino pin mappings can all be customized if the defaults are not convenient, and the motor driver control lines are broken out along the left side of the shield for general-purpose use without an Arduino.

Pololu item #: 2515
Brand: Pololu
Status: Active and Preferred 
Free shipping in USA 
Free add-on shipping in USA 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 30 V operating range and are efficient enough to deliver a continuous 18 A without a heat sink. The drivers offer basic current sensing and current limiting functionality, and they accept ultrasonic PWM frequencies for quieter operation. The Arduino pin mappings can all be customized if the defaults are not convenient, and the motor driver control lines are broken out along the left side of the shield for general-purpose use without an Arduino.

Pololu item #: 3156
Brand: Pololu
Status: Active and Preferred 
Free add-on shipping in USA 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

The P-Star 45K50 Mini SV is a small programmable module featuring Microchip’s PIC18F45K50 microcontroller. It packs a Micro-USB interface and 30 digital input/output pins onto a board measuring 2″ × 0.7″ and ships preloaded with a USB bootloader, so no external programmer is required.

Pololu item #: 3133
Brand: Pololu
Status: Active and Preferred 
Free shipping in USA 
Free add-on shipping in USA 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

The Tic T834 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC). This version incorporates a TI DRV8834 driver and male headers and terminal blocks are included but not soldered. It can operate from 2.5 V to 10.8 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (or 2 A max with sufficient additional cooling).

Pololu item #: 3132
Brand: Pololu
Status: Active and Preferred 
Free shipping in USA 
Free add-on shipping in USA 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

The Tic T834 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC). This version incorporates a TI DRV8834 driver and male headers and terminal blocks are included but not soldered. It can operate from 2.5 V to 10.8 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (or 2 A max with sufficient additional cooling).

Pololu item #: 2735
Brand: Parallax
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

The Boe-Bot Robot Kit is an educational kit complete with parts and a textbook for building and programming your own Boe-Bot robot. No previous robotics, electronics, or programming experience is required.

Pololu item #: 3709
Brand: Pololu
Status: Active and Preferred 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 6V brushed DC motor with long-life carbon brushes combined with a 312.5:1 metal spur gearbox. The gearmotor is cylindrical with a diameter of 20 mm, and the D-shaped output shaft is 4 mm in diameter and extends 18 mm from the face plate of the gearbox.

Key specs at 6 V: 46 RPM and 170 mA with no load, 220 oz-in (16 kg-cm) and 2.9 A at stall. Note: the gearbox torque limit is 70 oz-in (5 kg-cm); see detailed description for important product limitations.

Pololu item #: 3706
Brand: Pololu
Status: Active and Preferred 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 6V brushed DC motor with long-life carbon brushes combined with a 156.3:1 metal spur gearbox. The gearmotor is cylindrical with a diameter of 20 mm, and the D-shaped output shaft is 4 mm in diameter and extends 18 mm from the face plate of the gearbox.

Key specs at 6 V: 93 RPM and 170 mA with no load, 110 oz-in (7.9 kg-cm) and 2.9 A at stall. Note: the gearbox torque limit is 70 oz-in (5 kg-cm); see detailed description for important product limitations.

Pololu item #: 3702
Brand: Pololu
Status: Active and Preferred 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 6V brushed DC motor with long-life carbon brushes combined with a 62.5:1 metal spur gearbox. The gearmotor is cylindrical with a diameter of 20 mm, and the D-shaped output shaft is 4 mm in diameter and extends 18 mm from the face plate of the gearbox.

Key specs at 6 V: 230 RPM and 170 mA at no load, 54 oz-in (3.9 kg-cm) and 2.9 A at stall.

Pololu item #: 3485
Brand: Pololu
Status: Active and Preferred 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 12V brushed DC motor with long-life carbon brushes combined with a 488.3:1 metal spur gearbox. The gearmotor is cylindrical with a diameter of 20 mm, and the D-shaped output shaft is 4 mm in diameter and extends 18 mm from the face plate of the gearbox.

Key specs at 12 V: 29 RPM and 90 mA with no-load, 350 oz-in (25 kg-cm) and 1.6 A at stall. Note: the gearbox torque limit is 70 oz-in (5 kg-cm); see detailed description for important product limitations.

Pololu item #: 3482
Brand: Pololu
Status: Active and Preferred 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 12V brushed DC motor with long-life carbon brushes combined with a 250:1 metal spur gearbox. The gearmotor is cylindrical with a diameter of 20 mm, and the D-shaped output shaft is 4 mm in diameter and extends 18 mm from the face plate of the gearbox.

Key specs at 12 V: 57 RPM and 90 mA with no-load, 200 oz-in (14.5 kg-cm) and 1.6 A at stall. Note: the gearbox torque limit is 70 oz-in (5 kg-cm); see detailed description for important product limitations.

Pololu item #: 3478
Brand: Pololu
Status: Active and Preferred 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 12V brushed DC motor with long-life carbon brushes combined with a 100:1 metal spur gearbox. The gearmotor is cylindrical with a diameter of 20 mm, and the D-shaped output shaft is 4 mm in diameter and extends 18 mm from the face plate of the gearbox.

Key specs at 12 V: 140 RPM and 90 mA with no-load, 85 oz-in (6.1 kg-cm) and 1.6 A at stall. Note: the gearbox torque limit is 70 oz-in (5 kg-cm); see detailed description for important product limitations.

Pololu item #: 3474
Brand: Pololu
Status: Active and Preferred 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 12V brushed DC motor with long-life carbon brushes combined with a 25:1 metal spur gearbox. The gearmotor is cylindrical with a diameter of 20 mm, and the D-shaped output shaft is 4 mm in diameter and extends 18 mm from the face plate of the gearbox.

Key specs at 12 V: 570 RPM and 90 mA with no-load, 26 oz-in (1.9 kg-cm) and 1.6 A at stall.

Pololu item #: 2963
Brand: Unspecified
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

Get a FREE copy of Circuit Cellar magazine’s October issue with your order while supplies last. To get your free issue, enter the coupon code CIRCUIT1017 into your shopping cart. The magazine will add 6 ounces to the package weight when calculating your shipping options.

Pololu item #: 3865
Brand: PCX
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

These premium jumper wires are stranded 26 AWG wires with male terminations on both ends, for use with 0.1″ (2.54 mm) female headers, connectors, and solderless breadboards. The assortment of 2″ (5 cm) wires includes ten each of six different colors (black, red, yellow, green, blue, and white), so each unit of this product gets you 60 total wires.

Pololu item #: 3864
Brand: PCX
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

These premium jumper wires are stranded 26 AWG wires with female terminations on one end and male terminations on the other end, for use with 0.1″ (2.54 mm) headers, connectors, and solderless breadboards. The assortment of 2″ (5 cm) wires includes ten each of six different colors (black, red, yellow, green, blue, and white), so each unit of this product gets you 60 total wires.

Pololu item #: 3863
Brand: PCX
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

These premium jumper wires are stranded 26 AWG wires with female terminations on both ends, for use with 0.1″ (2.54 mm) male headers and connectors. The assortment of 2″ (5 cm) wires includes ten each of six different colors (black, red, yellow, green, blue, and white), so each unit of this product gets you 60 total wires.

Pololu item #: 3862
Brand: PCX
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

These premium jumper wires are stranded 26 AWG wires with male terminations on both ends, for use with 0.1″ (2.54 mm) female headers, connectors, and solderless breadboards. The assortment of 1″ (2.5 cm) wires includes ten each of six different colors (black, red, yellow, green, blue, and white), so each unit of this product gets you 60 total wires.

Pololu item #: 3861
Brand: PCX
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

These premium jumper wires are stranded 26 AWG wires with female terminations on one end and male terminations on the other end, for use with 0.1″ (2.54 mm) headers, connectors, and solderless breadboards. The assortment of 1″ (2.5 cm) wires includes ten each of six different colors (black, red, yellow, green, blue, and white), so each unit of this product gets you 60 total wires.

Pololu item #: 3860
Brand: PCX
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

These premium jumper wires are stranded 26 AWG wires with female terminations on both ends, for use with 0.1″ (2.54 mm) male headers and connectors. The assortment of 1″ (2.5 cm) wires includes ten each of six different colors (black, red, yellow, green, blue, and white), so each unit of this product gets you 60 total wires.

Pololu item #: 3965
Brand: PCX
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

These premium wires are stranded 26 AWG wires with male terminals on both ends. Together with our 0.1″ crimp connector housings, these wires can be used to make custom cables with 0.1″ (2.54 mm) connectors. The assortment of 2″ (5 cm) wires includes ten each of six different colors (black, red, yellow, green, blue, and white), so each unit of this product gets you 60 total wires.

Pololu item #: 3964
Brand: PCX
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

These premium wires are stranded 26 AWG wires with female terminals on one end and male terminals on the other end. Together with our 0.1″ crimp connector housings, these wires can be used to make custom cables with 0.1″ (2.54 mm) connectors. The assortment of 2″ (5 cm) wires includes ten each of six different colors (black, red, yellow, green, blue, and white), so each unit of this product gets you 60 total wires.

Pololu item #: 3963
Brand: PCX
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

These premium wires are stranded 26 AWG wires with female terminals on both ends. Together with our 0.1″ crimp connector housings, these wires can be used to make custom cables with 0.1″ (2.54 mm) connectors. The assortment of 2″ (5 cm) wires includes ten each of six different colors (black, red, yellow, green, blue, and white), so each unit of this product gets you 60 total wires.

Related Categories

Specials!
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors