Premium Jumper Wires

Select options:

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attached, and they are great for making quick and easy prototyping connections. The stranded 26-awg wires are available in five lengths—1″ (2.5 cm), 2″ (5 cm), 3″ (7.5 cm), 6″ (15 cm) and 12″ (30 cm)—and up to ten colors:

These are the same colors as those used on resistor color codes and rainbow ribbon cable. The available color options and pack sizes depend on the wire length:

length single-color pack quantity multi-color pack quantity
1″ (2.5 cm) 10 (six colors available) 60 (10 each of six colors)
2″ (5 cm) 10 (six colors available) 60 (10 each of six colors)
3″ (7.5 cm) 10 (six colors available) 50 (5 each of ten colors)
6″ (15 cm) 10 (ten colors available) 50 (5 each of ten colors)
12″ (30 cm) 10 (ten colors available) 50 (5 each of ten colors)

The single-color packs of the 1″, 2″, and 3″ wires are only available in six colors (black, red, yellow, green, blue, and white), while the single-color packs for the 6″ and 12″ wires are available in all ten colors. The multi-color packs of the 1″ and 2″ wires have ten each of six colors (black, red, yellow, green, blue, and white); the multi-color packs for all of the other wire lengths, including 3″, have five each of all ten colors.

These wires can be purchased with male terminations on both ends (M-M), female terminations on both ends (F-F), or one male and one female termination (M-F). These terminations are designed for use with 0.1″ (2.54 mm) male headers and female headers, solderless breadboards, and prototyping PCBs. Close-up pictures of the male and female terminations are shown below.

Premium jumper wire male end.

Premium jumper wire female end.

You can use the following selection boxes to get to the specific wires you are looking for:

Select options:

For versions of these wires without housings, see our wires with pre-crimped terminals, which can be used with our crimp connector housings to make custom multi-conductor cables or longer premium jumper wires. These versions are available in lengths of 1″, 2″, 3″, 6″, 12″, 24″, 36″, and 60″.

Subcategories

Premium 26 AWG stranded jumper wires with female terminations on both ends. They are available in five lengths (1″, 2″, 3″, 6″ and 12″) and up to ten colors.

Premium 26 AWG stranded jumper wires with male terminations on one end and female terminations on the other end. They are available in five lengths (1″, 2″, 3″, 6″ and 12″) and up to ten colors.

Premium 26 AWG stranded jumper wires with male terminations on both ends. They are available in five lengths (1″, 2″, 3″, 6″ and 12″) and up to ten colors.


Related Products

0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Right Angle
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Double-Sided
0.100" (2.54 mm) Female Header: 1x2-Pin, Straight
Female Crimp Pins for 0.1" Housings 100-Pack
Male Crimp Pins for 0.1" Housings 100-Pack
Crimping Tool: 0.1-1.0 mm² Capacity, 16-28 AWG
Crimping Tool: 0.08-0.5 mm² Capacity, 20-28 AWG

Related Categories

Cables and Wire
Electronics Prototyping
Connectors
PCX Products
Wires with Pre-Crimped Terminals
Crimp Connector Housings
Solderless Breadboards
0.1″ (2.54 mm) Female Headers
0.1″ (2.54 mm) Male Headers
Prototyping PCBs
Jumper Wire Kits
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors